Grounded Silicone Rubber Griffin Beaker Heaters (GBHE)

Specifications

Silicone Rubber Griffin Beaker Heater

• Maximum exposure temperature: 232oC (450oF).
• 120 or 240VAC
• Power density: 5.0 watts/in2 (0.008 watts/mm2)
• Heating element is laminated between two layers of 15mil fiberglass reinforced silicone rubber
• Moisture, chemical, and radiation resistant
• Dielectric strength of over 2000 volts
• 24″ (610mm) long power leads with
  • 120VAC: Standard 2-prong plug (NEMA 1-15)
  • 240VAC: Bare wire connection
• Requires a temperature or power controller

SDX Digital Benchtop Temperature Controller

• Voltage: 100 – 240 VAC
• Max. Amp Load: 15 Amp North America; 10 Amp Europe
• Temperature Control Range: 0°F to 999°F and 0°C to 999°C
• Temperature Display Units: °F and °C
• Sensor, 5 ft (1.5 m) included: Type-J or Type-K Thermocouple, or PT100-RTD
• Accuracy: +/-0.5% span +/- 1 digit at 77°F (25°C)
• Alarms: Audible; Programmable for high or low absolute, or deviation
• Input Power Cord/Connections: 79 in (2 m) long with input power plug based on model
• Output Power Cord/Connection: C13 receptacle with mating C14 plug
• Special Features: Digital PID with Autotuning
• Environmental Exposures:
  • Operating range: 32°F to 111°F (0°C to 44°C)
  • Storage range: -4°F to 158°F (-20°C to 70°C)
  • Relative humidity: < 95% non-condensing temperatures
• Enclosure Dimensions:
  • 6.4 in x 2.6 in x 9.5 in
  • (162 mm x 66 mm x 241 mm)
• Enclosure Rating/Classification Designation:
  NEMA1; IP30